Search
Filters
Close

Selden 75mm Bowsprit

Selden extending gennaker bowsprit. Ideal for moving the tack of the asymetric sail away from pull pit.
Manufacturer: Selden
£602.95
£515.95

Extendable gennaker bowsprit. Just fit the two stainless steel pad eyes to the deck in line with the bow bracket. This bracket is a stainless ring with a low friction polyamide inner lining through which the bowsprit slides into the “active” position. After the gennaker is doused, the bowsprit can slide back and be secured to the aft eye. If required, it can be quickly removed and stowed securely below.
The gennaker tackline runs through the bowsprit, entering and leaving via well rounded holes, and then aft to the cockpit. An alternative is to fit an external tack block at the outboard end.

Bow brackets sold seperately, see below.

For full dimensions download Selden PDF here

 

75mm Bowsprit max length 2230mm

Approx displacement (Tonnes) Maximum unsupported length, USL (mm)
  72/72
75/75
87/87 99/99
1.7
1280      
2.1 1090      
2.4
960 1700    
2.8 860 1520    
3.1
790 1390    
3.4 720 1280 1640  
3.7
670 1180 1520  
4.5 570 1010 1300 1710
5.2
500 890 1140 1510
Min distance between supports, DBS (mm) 580 600 700 800
Max Load at inner end (kN)* 2.9 4.9 5.4 6.2

Extendable gennaker bowsprit. Just fit the two stainless steel pad eyes to the deck in line with the bow bracket. This bracket is a stainless ring with a low friction polyamide inner lining through which the bowsprit slides into the “active” position. After the gennaker is doused, the bowsprit can slide back and be secured to the aft eye. If required, it can be quickly removed and stowed securely below.
The gennaker tackline runs through the bowsprit, entering and leaving via well rounded holes, and then aft to the cockpit. An alternative is to fit an external tack block at the outboard end.

Bow brackets sold seperately, see below.

For full dimensions download Selden PDF here

 

75mm Bowsprit max length 2230mm

Approx displacement (Tonnes) Maximum unsupported length, USL (mm)
  72/72
75/75
87/87 99/99
1.7
1280      
2.1 1090      
2.4
960 1700    
2.8 860 1520    
3.1
790 1390    
3.4 720 1280 1640  
3.7
670 1180 1520  
4.5 570 1010 1300 1710
5.2
500 890 1140 1510
Min distance between supports, DBS (mm) 580 600 700 800
Max Load at inner end (kN)* 2.9 4.9 5.4 6.2
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent